Jackson kayak Flex Drive 3D, Owner'S Manual

Page: 10 / 16

7. Changing Prop Shear Pin
In the event of a severe bump, the prop pin should break to avoid damaging
the bottom unit or the propeller. We have supplied a spare prop shear pin
that is easily replaced to quickly make your drive system operational again.
IMPORTANT: Removing the prop should take place on land in the event
you drop any of the components.
(A)
Use the 3mm hex key to loosen the prop screw
(B)
Remove the prop from the shaft
(C)
Remove the black plastic sleeve from the prop shaft. Remove the
broken shear pin. Replace the shear pin and the black plastic sleeve.
Replace the prop and tighten prop screw snugly
7. replace prop shear pin
(A)
(B)
(C)