6
Fig. 1: Screw the brass nut
of the regulator into the
side of the control box.
Fig. 2
Tools Required for Assembly:
1
x
# 2 Phillips Screw Driver
1
x
Small Crescent Wrench
Please ensure all components have been supplied with this appliance before assembly or operation begins.
Please remove all packaging materials before using this portable grill.
Assembling & Preparing Your Grill:
STEP 1:
Install the hood handle by opening the hood and placing the black hood handle insulators (flat side down) over the
handle mounting holes. Place the handle on the handle insulators and screw in the bolts from the bottom. Do not
over tighten and be careful not to cross thread the bolts into the handle.
STEP 2:
Place the unit in the upright position and screw in the supplied
portable regulator.(Fig. 1) Do not over tighten. Lubricate the threads
of the regulator valve with petroleum jelly or grease, and insert the gas cylinder onto the regulator valve and hand
tighten firmly. Disconnect the gas cylinder when the appliance is not in use. DO NOT obstruct the flow of combustion
air and ventilation air to this portable grill.
STEP 4:
Install the supplied battery in the ignition module. (Fig. 2) To do so, unscrew the black igniter button (cap) by turning it
counter clockwise. The igniter works only if the battery is installed in the correct direction.
STEP 5:
Remove cooking grid from the protective plastic bag, and install in the grill.
TECH TIP
Do not over tighten the brass
nut as it may crack or break;
slightly tighter than finger tight
is sufficient.
!WARNING!
Use ONLY the Regulator supplied
with this Grill. Use ONLY authorized
Jackson Replacement Parts.