8
7. Next, bend the flex fuel inlet line into a gentle
“S” and thread it onto the Fuel Manifold under the Side Burner.
Tighten using 2 x ¾
” (or 2 x 19mm) wrenches (Fig. 9; NOTE: Sealant NOT required at this connection).
Figure 9
Sealant NOT required
at this connection.
E) Rotisserie Kit Installation:
1. Slide the Rotisserie Motor onto the Motor Mount Bracket, on the RH side of the grill (Fig. 10).
2. Slide the two forks and the counter balancer onto the spit rod, and position as desired. Tighten in place.
3. Place the rotisserie rod into the motor. Slide the rotisserie rod bushing over the opposite end of the rod and
drop into the cut-out provided in the RH side of the inner hood (Fig. 11). Once in place, tighten the thumb-
screw on the spit rod bushing.
.
Figure 12: Rotisserie Kit
fully installed.
Figure 11: Line groove
up with cutout and drop
spit rod assembly into
place
Figure 10
!TECH-TIP!
Apply anti-seize grease to the threads of
any screw or bolt before reinstalling. This
will greatly simplify future service work.
