8
LIGHTING INSTRUCTIONS
Open the lid before lighting the portable grill. Make sure there are no obstructions of air flow to the grill.
Spiders and insects can nest within the burner and clog the burner, venturi tube and the gas orifice.
Clean the burner ports by using a stiff wire brush, paper clip or stiff pipe cleaner. Make the gas control
knob is turned to the OFF position. Turn the regulator valve to the highest setting and depress the
igniter button until burner lights. After the appliance has lit, please observe the burner flame, make sure
all burner ports are lit and that the flame is constant and no longer than 2” inches in length.
If the burner does not light before 7
seconds of clicking, turn the regulator to the OFF
position and wait 5 minutes for the gas to clear
before trying again.
If the burner flame goes out while the unit is
operating turn the unit OFF immediately, open the
lid to clear out any gas.
Turn off LP supply at cylinder when appliance is
not in use.
Operate the grill for the first time approximately for 15 minutes before you use the grill to cook food.
This will burn off any residues from the assembly process.
Clean your grill after each use. Do not use any abrasive cleaners, or flammable cleaners. This could
damage the surfaces of this grill.
Regulator Valve
“OFF” position
Igniter
Regulator Valve
Lighting Position
Summary of Contents for JPG50
Page 11: ...10 JPG50 Exploded View ...
