Jackco 811 User Manual Download Page 10

LIMITED ONE YEAR WARRANTY

Jackco Transnational Inc. warrants all Jackco equipment and tools to the original purchaser against any manufacturing defect in material or 

workmanship for a period of one (1) year from the original date of purchase. If the defective equipment or tool is determined to be covered under 

this warranty, it shall be repaired or replaced at manufacturer's discretion without charge, provided that the equipment or tool must be returned 

with proof of purchase to the dealer and freight prepaid, if returned to the manufacturer. This warranty shall not apply to damage due to accident, 

negligent use, and lack of maintenance, abuse or applications other than the specific function the equipment or tool is designed for.

No other warranties, expressed or implied, including those of merchantability or fitness for particular purpose shall be applicable to Jackco 

except as specifically stated herein. In no event shall Jackco be liable to any party for any special, direct, indirect, consequential, punitive 

damage of any nature caused by the sale or use of the equipment or tool.

Note: This warranty gives the original purchaser specific legal rights which may very from state to state.

Jackco Transnational Inc. © 2009

South El Monte, CA

888-452-2526  www.jackco.com

Summary of Contents for 811











Reviews: