Jackco 66300B User Manual Download Page 4

• Only original replacement parts should be used. 

    Extremely Important:

 never use brake fluid.

• When the jack is not in use, make sure the lifting arm is fully retracted to avoid 

corrosion.

• Keep the jack in a clean, dry place and out of children’s reach.

• Replace the hydraulic fluid in the reservoir at least once a year. To check the 

hydraulic fluid level, lower the lifting arm completely. 

• The hydraulic fluid level should be just below the filler plug. Replenish if necessary, 

and reinstall the rubber filler plug. Excessive hydraulic oil may render the jack 

inoperative.

 

• Inspect the jack before each use. Take corrective action or remove the jack from 

service if any of the following problems are found:

a. Cracked or damaged frame

d. Loose hardware

b. Leaking hydraulic fluid  

e. Modified equipment

c. Scored, damaged piston rod

•  Keep warning labels and instructional decals clean and readable. You may use a 

mild soap solution to wash external surfaces of the jack.

MAINTENANCE

Important:

 Both the maintenance and repair of the jack may only be performed by 

qualified persons, who have sufficient knowledge of the hydraulic system used in these 

jacks

Regularly lubricate the moving parts in the wheels, arms, handle 

and pump roller pin.

4

Summary of Contents for 66300B









Reviews: