Jack OA8200 User Manual Download Page 2

Page 2

OVERVIEW (FIG. 1 & 1-A)

  1. Verify contents and familiarize yourself with the parts 

(FIG. 1)

.

NOTE: 

Please read thru the instructions before beginning.

IMPORTANT!

For roofs 3 1/2” to 6” ONLY!

IMPORTANT!

The point of the base mount must 

face towards the front of the vehicle.

IMPORTANT!

There are two lengths of adjustable 

connectors included.

For roof thicknesses 1 1/4” to 3 1/2” 

use the assembly as shipped.

For roof thicknesses 3 1/2” to 6” 

use the longer connector.

IMPORTANT!

You must install 

the included 

wall mount switch 

KC# PB1000 

to operate the 

JACK antenna.

(See page 5)

FIG. 1-A

FIG. 1

IF YOUR ROOF IS LESS THAN 3 1/2” THICK, 

PROCEED TO THE NEXT PAGE.

You only have to install the supplied longer connector for roofs 

thicker than 3 1/2”.

If using the longer connector, install it now, 

BEFORE INSTALLING BASE MOUNT ON ROOF (FIG. 1-A)

.

  •  Remove the existing adjustable connector from the upper 

connector located in the base mount.

  •  Line up the tab with the shorter side as shown at right and engage 

the longer connector onto the upper connector. 

  •  Leave connector sticking out of base mount more than the 

thickness of the roof.

Reviews: