Poles (silver)
3.
Position the roof poles in the centre of the
flysheet with the hub of the “star” over the
apex of the flysheet.
4.
Connect the clip at the apex of the flysheet
to the underside of the central hub.
5.
Every second roof pole has a pin at the end.
These should be slotted into the
corresponding lugs in the webbing tapes
that are located to the side of, and level
with, the top of the doors (above the logos).
6.
Attach all the clips on the upper section of
the flysheet to the roof poles. Proceed with
care, as this procedure is difficult to
accomplish at a later stage.
(note: only the black pole/ clip is shown here)
CORRECT!
2
