1.3 Install the body
1) Move the machine with installed heat pipe and fittings before the window,
and the distance between the body and walls or other objects shall be least
50 cm (as shown in Fig.4).
2) Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints
into the hole of the window sealing plate assembly (as shown in Fig.5 and
Fig.6).
Notes: 1. the flat end of the exhaust pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (greater
than 45 °). Keep the ventilation of the exhaust pipe not blocked.
Fig.4
Fig.6
Fig.5
