Step Two:
The Support Legs connect to the Frame (B) with the use of Slide Guides.
Thread the
2
3
/
8
" Bolt through the hole in the Support Leg, through the slotted
area in the side of the Frame, and through the Slide Guide.
Use the
1
3
/
8
"
Black Knob to tighten into position.
Repeat on other side.
Step Three:
Loosen the black knob on the Bottom Canvas Holder (C) and slide over the Mast.
Position at desired height and tighten the knob.
Step Four:
Remove the Top Canvas Holder from the Mast and turn it around to face the
front of the easel. To set into place insert the
1
7
/
8
"
Black Knob With Bolt into the
hole on the back of the Frame. Tighten when the Top Canvas Holder is at the
height you want.
Top Canvas Holder
Bottom Canvas Holder
Step Two
Step Three
Step Four
