Jack-Post Country Garden CG-45 Use And Care Manual Download Page 4

 

 

    

 

 

This furniture has been made from seasoned wood and has already been factory primed and finished 
with an oil-based paint.  With proper maintenance, it will give you years of enjoyable service.  Wood 
is a natural material and its appearance will change when exposed to the elements; surface splits and 
checking may appear, particularly on the end grain and to a lesser extent on the surface within a few 
weeks if left exposed to the elements.  The furniture is designed with this in mind to remain strong and 
durable. If left exposed to the weather, your furniture will fade in color. The exact color will depend on 
the environment; for example, less fading will occur if the furniture is placed in a shady location under 
a tree. To help preserve the color, cover the furniture with a garden furniture cover when not in use. 
Wood expands and contracts with changes in relative humidity. To prevent over drying and excessive 
cracking, do not store in a heated place.

 

 

 

 
 

REFINSHING

  

Based on exposure to the elements the finish may need to be restored.  Proceed as follows: 

OIL-BASED PAINTED WOOD CARE GUIDE

PLEASE READ THIS INFORMATION CAREFULLY -  IT WILL HELP YOU TO MAINTAIN YOUR FURNITURE

1.

Cover the floor area with a suitable liquid resistant ground sheet to contain dust, dirt or spills.

2.

Use suitable protective clothing, i.e., rubber gloves, apron, safety glasses, dust mask, etc.

3.

Check and retighten all furniture hardware

4.

Remove any finish that has become loose or cracked by using a scraper or wire brush.

DO NOT USE STEEL WOOL  as the fine particles may result in dark rusty blotching.

5.

In a well-ventilated area or outdoors, lightly sand using 100-200 grit sand paper.

6.

Remove any dust by wiping with a damp cloth.

7.

Allow item to dry completely.

8.

Use an oil-based primer on any bare wood spots.

9.

Brush or spray on new finish using the manufacturer’s instructions – using an oil-based paint

available at any paint retailer.

1.

We recommend cleaning the surface of dirt, bird droppings, tree sap, grease. etc. Scrub

with a cloth or soft brush using a mild household cleaner, dish or laundry detergent.

2.

Rinse 

thoroughly.

3.

Allow to dry completely and retighten all hardware.

               

CARE AND MAINTENANCE

CG-45

04

© 20

20 

Jack-Post Corporation

10/20

THIS PRODUCT DESIGNED FOR A MAXIMUM CAPACITY OF 500 POUNDS.

NOTE: Save assembly instruction sheet for future reference. 

WARNINGS:

USE & CARE

Summary of Contents for Country Garden CG-45















Reviews: