Jack LaLanne's MT-1020, Operating Manual, Page: 9 / 24

8 9
DOWNWARD POSITION
5
7
4
6
Top Rim
ASSEMBLY (Cont.)
STEP 4:
Place filter/blade inside receptacle. Rotate
the filter/blade allowing it to settle into
alignment. Press down on rim of filter/
blade firmly to secure.
IMPORTANT: The
unit will not start until filter/blade is secure
and firmly in place. The motor will not start
until the unit is properly assembled.
STEP 6:
Make sure juice spout is in the downward
position. If the juice spout is left in the
upright position the juice will not flow.
It will stay in the receptacle and may
overflow from the sides.
STEP 7:
Insert pusher into chute. Always use pusher
to feed fruits and vegetables into unit.
Push gently, never force. The blade will do
the work.
STEP 5:
Place lid with built-in pulp guard on top
of receptacle, making certain it is securely
aligned with the pulp guard facing in the
opposite direction of juice spout. Lock lid
into place by lifting locking bar up until it
clicks into grooves located on both sides of
the lid. Make sure locking bar is in the full
upright, locked position.
IMPORTANT: The
unit will not start until this bar is properly
locked in place and the pulp collector is
properly assembled.
UPWARD POSITION
DOWNWARD POSITION
Juice Spout
Lid with Built-In
Pulp Guard
Receptacle
Receptacle
Juice Spout
Pulp
Collector
Lid with Built-In
Pulp Guard
Pusher
Chute
Filter/Blade