Jaccard J350G, Manual

Page: 7 / 24

Pag. 7
MANUFACTURER’S WARRANTY AND LIABILITY
The manufacturer’s warranty covering the functioning of the machines and their complian-
ce to the service for which they have been designed depends on the correct application of
the instructions contained in this manual.
The Manufacturer assumes no liability either direct or indirect deriving from:
• Failure to comply with the instructions contained in this manual;
• Use of the machine by personnel who has not read or fully understood the content of this
manual
• Use not complying to the specific norms currently applicable in the country of installation
• Unauthorized modifications and/or repairs
• Use of non original accessories or spare parts.
• Exceptional events.
PLATES – CONFORMITY MARKS
The machine has been constructed in compliance with NSF/ANSI Standard 8. All the parts
used in the machine meet the terms of NSF/ANSI compliance and the NSF mark has been
applied to substantiate this compliance.
The plate carrying the Manufacturer's data, the machine data and the NSF mark are ap-
plied onto the machine base under the blade guard tie-rod knob.
In case of wear or damage, the user must replace it.
ENVIRONMENTAL CONDITIONS OF USE
- Temperature from 23 °F to + 104 °F
- Relative humidity max 95%
Model Serial N°
Volt Hz Amp.
Phase Year Month