Quick installation Guide
interSeptor Pro
www.jacarta.co.uk
2
Configuring Network Settings via LCD Screen
The default network settings for the interSeptor Pro are as follow:
IP: 192.168.1.1
Subnet Mask: 255.255.0.0
Gateway: 192.168.1.254
To change these settings prior to network communication please follow
the following instructions:
1. Press the
Set
button on the front of the interSeptor Pro so
System
Config
displays on the LCD screen.
2. Press the
Set
button.
3. Press the
Down
button until
IP Address
displays on the LCD screen.
4. Press the
Set
button.
5. Either enter the required IP address for the interSeptor Pro or use the
default address (192.168.1.1). Press the
Set
button to increase or
decrease a number, and the
Down
button to move to the next number.
6. Press the
Set
and
Down
buttons simultaneously to exit the setting
menu once the IP address is entered.
7. Repeat steps 1-5 above to enter the subnet mask and gateway (listed
as
Net Mask
and
Gateway
in the system configuration menu).
8. Configure any of the other system configurations that are required, and
then select
Back to Idle
to complete the system setup.
It is now possible to access the interSeptor Pro via web
browser or telnet.
Note: Default Administrator
ID: iSPro
Password: admin
