S5 Workshop Manual
Engine
EM-36
4) If there is crack or breaking on turbine blade, the turbine and shaft assembly can't
be used. If the blade only has slight bending, it can be used. But if there is serious
bending, it can't be used.
5) Inspect whether there is foreign matter blocked oil pipe in turbine core assembly.
6) Exhaust gas valve Inspection
Under the following pressure, inspect the operation of waste gas valve rod.
Normal value: 77.5 KPa (0.79 kgf/cm
2
)
3. Air Intake Manifold
1. Component
Compressor
drum
Oil duct
Turbine
Big bowl plug
Intake manifold
Stud of throttle valve
Vacuum boosting bent pipe
component
Connecting pipe of
breathing apparatus
Vent pipe
www.CarGeek.ir
