JAC S1, Owner'S Manual, Page: 10 / 77

Finishing the said procedure, the
system will be relieved.
Power window
The power window can be operated
only when the ignition key is in "ON"
position. Each door has a power
window switch to control window.
Main switch of power window at
driver seat can be used to control
the passenger power windows.
Pressing down switch (1) can open
the cab window. The opening degree
of window can be adjusted by
switch. Lifting the power window
switch can close the window. To
avoid the passenger operating the
window randomly, you can press
down switch (2) in main control seat
to lock the window. To relieve the
function of power window, please
press the lock switch. Pressing the
window control switch, wait a mo
鄄
ment, the system will resume its
function. After the ignition switch is in
"ACC" or "LOCK" position for 30 sec
鄄
onds, the power window can be op 鄄
erated. But when the front window is
open, power window can not func
鄄
tion.
Caution:
音 Only the remote controller
can relieve the installed system.
If remote controller fails during
the installing phase, you can
carry out the following proce
鄄
dure 院
1 援 Use the key to open the door.
At this time, the warning will be
activated.
2
援 Put the key into ignition switch,
and turn to "ON" position.
3
援 Wait for 30 seconds.
Characteristics of JAC vehicle
8
渊 1 冤 Before close the window, please
confirm if there is arm or other barrier
on the window.
渊 2 冤 Do not operate the main control
button in the driver seat and individ 鄄
ual window switch at the same time.
If you do that, the window will stop
functioning and it will be difficult to
open or close.
渊 3 冤 Do not leave the child in the ve 鄄
hicle alone. You must take away ig 鄄
nition key to ensure safety.
Adjust the front seat
Move seat back and forth
If you want to move the seat back
and forth, please lift the adjusting
lever of seat and hold it. Slide it to
the desired position, then release the
lever and confirm locking of the seat.
Adjust front seat back rest
Incline forward a little, and pull back 鄄
ward the link which is near the seat.
Incline the seat backward and adjust
to the desired position. After posi
鄄
tioning, undo the link.
Warning 院
音 Do not adjust seat when the
vehicle is running. If you do that,
serious injury or death will be
caused.
Warning 院
音 When the vehicle is running,
do not make the front seat in tilt
position, to reduce the sliding of
the knee/shoulder safety belt
and serious hurt in case of col
鄄
lision. Otherwise buttocks of the
passenger may slide below the
knee/shoulder safety belt or
slide out of the safety belt, and
the passenger can not be se
鄄
cured properly. In addition, the
safety belt may apply force to
9