background image

Transmitter Cable Connectors

In instances where the pigtail from the panel controller  is
not terminated with a Molex connector for connection
directly to the receiver cable, use the butt connectors
supplied to make wire to wire connections  between the
controller panel and the receiver. See Fig. 1, 2  below for
the wire to wire color coding. Note that the blue wire
from the receiver will, for example, connect to the blue
wire from the panel controller pigtail, the yellow to yellow, etc.

JABSCO WIRELESS RECEIVER

CONTROLLER & LIGHT CABLE WIRE COLOR CODING

Black to Controller
Brown to Controller

Green to Light
Green to Controller
Blue to Controller

Yellow to Light
Yellow to Controller

(+) Power to Battery

Black to Light

Brown to Light

Orange to Light
Orange to Controller
Blue to Light
Not Used
Not Used

(-) Ground to Battery

Mount the receiver in a suitable location using the two
screws supplied.

LEARNING MODE PROCEDURE

Note

The transmitter included with this product was ini-

tialized at the factory. It is not necessary to conduct this
procedure unless adding or replacing a transmitter.

Disconnect battery power to the receiver.

Press and

hold the “on/off” transmitter button while reconnecting
power to the receiver. The searchlight will turn “on” with-
in (2) seconds. Code synchronization is complete.

The Jabsco Wireless Remote Control Sytem can sup-
port (4) separate transmitters. Each time a transmitter is
added to the system or is replaced, all transmitters
require re-initialization using the above procedure.

Power to the receiver must be disconnected then recon-
nected while pressing the transmitter’s “on/off” button for
each transmitter added in turn.

Panel 

Controller

Wireless

Receiver

135 

Searchlight

To Wired

Controller

To 

Searchlight

Black to Controller
Brown to Controller

Green to Light
Green to Controller
Blue to Controller

Yellow to Light
Yellow to Controller

(+) Power to Battery

Black to Light

Brown to Light

Orange to Light
Orange to Controller
Blue to Light
Gray to Light
Gray to Controller

(-) Ground to Battery

Panel 

Controller

Wireless

Receiver

5”

Searchlight

Fig. 2 (Lights with 43670-1003 Controller)

Fig. 1 (Lights with 60020-0000 Controller)

 

Summary of Contents for 60000 Series

Page 1: ...light installa tions It works in conjunction with a standard hard wired Jabsco panel mount controller thereby adding a second controller for wireless remote operation of the search light at a distance of up to 100 30 Meters In applica tions where a panel mounted controller is not desired the 60000 0000 0024 Wireless Remote Control System can be set up for wireless only operation The Jabsco wireles...

Page 2: ...tialized at the factory It is not necessary to conduct this procedure unless adding or replacing a transmitter Disconnect battery power to the receiver Press and hold the on off transmitter button while reconnecting power to the receiver The searchlight will turn on with in 2 seconds Code synchronization is complete The Jabsco Wireless Remote Control Sytem can sup port 4 separate transmitters Each...

Page 3: ...then change to match that indicated by the toggle switch When the searchlight has been turned on using the hard wired panel controller s on off toggle switch the light can be turned off using the wireless transmitter without the need to return to the helm station to deacti vate the light Although the toggle switch then indicates on the searchlight will be off With any movment of the wired controll...

Page 4: ... UNSUITABLE 4 This warranty does not extend to any product manufactured by Jabsco which has been subjected to misuse neglect accident improper installation or use in violation of instructions furnished by Jabsco 5 This warranty does not extend to or apply to any unit which has been repaired or altered at any place other than Jabsco s factory or by persons not expressly approved by Jabsco nor to an...

Reviews: