6
ENGLISH
Manual pairing mode
If you wish to use the headset with a different phone, or if
the pairing process was interrupted, you can manually set
the headset to pairing mode .
Make sure the headset is on . Press and hold the answer/end
button for approximately 5 seconds until the
Bluetooth
®
icon turns from a steady light to a flashing light . Then repeat
steps 2 and 3 in the above pairing guide .
Connecting with your phone
Pairing is only needed the first time a headset and phone
are used together . When the headset and phone have been
paired once, they will automatically connect when the
headset is on and
Bluetooth
®
is activated on the phone . The
headset can be used when it is “connected” to the phone . If
the devices are paired, but do not immediately connect, tap
the answer/end button . When your headset is connected the
Bluetooth
®
connection icon in the Jabra StatusDisplay™ will
be constant for 3 seconds and the headset voice guidance
will say “connected” .
WEARING STYLE
The Jabra Talk 15 SE is ready to be worn with or without the
ear hook . The ear hook can be removed and the headset can
be used with the eargels .
The eargels can be used for both left and right wearing . The
eargels come in two different styles to fit any ear . You can also
twist the eargel slightly to optimize the fit and comfort .
For optimal performance, wear the Jabra Talk 15 SE and your
mobile phone on the same side of your body or within line
of sight . You will get better performance when there are no
obstructions between your headset and your mobile phone .
