5
ENGLISH
JABRA SUPREME
PAIR A NEW OR SECOND DEVICE
1 . Ensure that the Jabra SUPREME UC is turned on .
2 . Tap the
Voice Control
button on the Jabra SUPREME UC until
you are prompted to ”Say a command” .
3 . Say ”Pair new device” and follow the pairing instructions .
NOTE:
If you have disabled Voice Guidance and Control you can
put Jabra SUPREME UC in pairing mode manually by holding the
Answer/end
button while flipping the boom arm to
On
position .
The Status Display will flash blue to indicate that you are in pairing
mode .
RE-PAIRING THE JABRA LINK 360 ADAPTER
1 . Remove the
Jabra LINK 360
adapter from the PC, and turn off
the Jabra Supreme UC and other headsets .
2 . Put the Jabra Supreme UC in pairing mode by press and
holding the
Answer/end
button and opening the flip boom
arm . Release the button when you hear ”Welcome, you are now
ready for pairing” .
3 . Put the
Jabra LINK 360
adapter into the PC to begin pairing
automatically . It can take up to 1 minute to pair . The
Jabra
LINK 360
status LED will flash blue . When the status LED turns
steady blue, the pairing is complete .
TIP
: For extra functionality download and install Jabra PC Suite
from www .jabra .com/setup, and run Jabra Control Center .
