Jabra SP5050 - Bluetooth hands-free Speakerphone, Manual, Page: 7 / 14

5
Jabra SP5050 Speakerphone
3 . your phone will find the Jabra SP5050 .
your phone then asks if you want to pair with it . accept by
pressing ‘yes’ or ‘ok’ on the phone and confirm with the pass-
key or Pin = 0000 (4 zeros) . your phone will confirm when pair
ing is complete .
4. In case of unsuccessful pairing, repeat steps 1 to 3.
you can manually put your Jabra SP5050 into pairing mode, if
you want to pair with a new phone:
. Make sure the Speakerphone is off .
2 . Press and hold the answer/end button for approx 7 sec .
until the connection status indicator light starts blink
continuously .
3 . Set your Bluetooth phone to discover your Speakerphone
like described above
5 hoW To…
Answer a call
• Tap the answer/end button
End a call
• Tap the answer/end button
Make a call
• When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
Speakerphone . if your phone does not allow this feature, press
on the Jabra SP5050’s answer/end button to transfer the call to
the Speakerphone .
Reject a call*
• Press the answer/end button when the phone rings to reject an
incoming call . depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
hear a busy signal .
Activate voice dialling*
• Press the answer/end button . for best results, record the voice-
dialling tag through your Speakerphone . Please consult your
phone’s user manual for more information about using this
feature .
* Phone dependent