Guided setup:
As a part of the installation, you can dial into your local Jabra Setup server
which will configure the audio path. Please follow the instructions shown
on the display. If your Jabra Setup server is unavailable, please contact
your local Jabra Support team.
Phone settings with device software version 9.xx and higher:
Phone settings are no longer required. Once the phone connector has been
adapted correctly, a headset symbol should appear in the phone display. If
the headset symbol does not appear, please check the following settings:
Menu>Settings>Phone>Phone connector>Activate/select handset
Phone settings with device software lower than version 9.xx:
Please note that the “Force Headset” function must not be activated on
the device as this will prevent you from accepting external calls.
Menu>Settings>Phone>Phone connector>Force headset OFF
Menu>Settings>Phone>Socket>Activate headset
Ringtone signal/phone settings:
Please note that the ringtone signal on the headset will only be
transferred if one of the following ringtones has been selected:
Standard/Classic/Cold River/Dooing-Dooing
Menu>Settings>Rington>Internal/External
The following options need to be set to OFF:
05/04/2021 16:19
https://www.jabra.ca/supportpages/jabra-pro-9470/9470-66-904-105/faq/0dcea0e7-
995b-4938-93f0-35faf9ad6add
Page 3 of 4
