1
B
A
B
A
B
A
Contents:
• Base
• Table grip
• Tube A
• Tube B exstension tube
Pass the cable through the disc
base, and then through the hole
in the table grip.
Insert the micro USB pin
and pull the cable through
tube A.
If the exstension tube is need-
ed, pull the cable
through tube B.
4. Assemble tube A and B. Screw tube AB onto
the base disc and connect the Jabra Noise
Guide to the power cable. Screw the Jabra
Noise Guide onto the tube. Mount to a flat sur-
face and tighten the screw on the table grip.
5. Please ensure that the cable comes out where
there is a hole in the disc base so the cable is
not pinched.
IMPORTANT!
In order to prevent
damage to your Jabra Noise Guide, we recom-
mend that you always use the table grip as
shown in this picture.
UK ·
Quick start · Jabra Noise Guide
Mounting the Jabra Noise Guide to the table stand