7
Jabra Pc suITe Programs
After installing the software, you will have an All Programs > Jabra > Jabra PC Suite folder in your Windows Start
menu. It provides links to the following programs:
- Jabra Control Center
Enables you to configure your controller from your PC.
- Jabra Device Firmware Updater
Enables you to update the controller firmware.
- Jabra Devices Service
Runs in the background and monitors your USB ports for Jabra devices. It makes sure that Windows will
recognize these devices and enables the Jabra Control Center and Softphone drivers to interact with them.
In addition to the above programs, the PC Suite also provides drivers for several types of softphones, including
Skype, Cisco IP Communicator and Microsoft® Lync™ 2010.
When you are using a supported softphone, you will be able to control that softphone using the buttons of the
controller. You can also talk using any softphone using its native graphic interface on your computer.
Note:
Jabra is constantly evaluating the softphone market to see which new programs should be
supported with a dedicated driver. Contact your Jabra representative or see the Jabra web site for the
latest news on softphone driver development.
usIng Jabra conTroL cenTer wITh The Jabra LInk 280 conTroLLer
Jabra Control Center is the Jabra Control Suite program that enables you to configure your controller. To run
the program, click on the Windows Start menu and select All Programs > Jabra > Jabra PC Suite > Jabra Control
Center.
When the controller is connected to your computer, you will see the settings that are relevant for that controller.
These settings are divided into three tabs: Softbuttons, Settings, and Mobile (only when activated). Each of these
is described below.
