Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES How To Connect Download Page 2

Page: 2 / 4

Please note that full functionality is only available when all the color-

marked parts of the cables are inserted into the EHS adapter, see photo.

Put the headset into the base and activate the “DHSG” mode.

Hold down the “phone” button on the base of the Jabra GN9330e for

approx. 6 seconds until the online display (blue LED) on the headset starts

to flash. The current software is displayed to you by activating the volume

controller in the form of the charge display (green LED).

LEDs from left to right:

LED 1 = RHL

LED 2 = DHSG

LED 3 = AEI

LED 4 = MSH

Thereafter, you can switch into the different software modes (LED 1-4)

with the “volume” controller on the headset. To confirm the software has

successfully installed, the base automatically switches back to charge

mode after approx. 15 seconds.

04/11/2022 08:29

https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/2188ed47-
9bb4-4f91-bf14-ca96af19c4b8

Page 2 of 4

Summary of Contents for LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES

Page 1: ...r marked with the phone symbol 2 Now connect the end of the RJ45 to RJ45 connection cable EHS adapter marked in red with the socket of the EHS adapter marked with AUX and the socket of your Jabra GN93...

Page 2: ...software is displayed to you by activating the volume controller in the form of the charge display green LED LEDs from left to right LED 1 RHL LED 2 DHSG LED 3 AEI LED 4 MSH Thereafter you can switch...

Page 3: ...wing the correct adaptation of the audio jack a headset symbol should appear in the phone display If the headset symbol does not appear please check the following settings Menu Settings Phone Audio Ja...

Page 4: ...lassic Cold River Dooing Dooing Menu Settings Dial Tone Internal External Should the dial tone signal transfer not work although you have setup the correct ringtone please check the following settings...