Jabra Link 14201-10 How Do Download Page 4

Page: 4 / 4

As part of the installation, you can dial into your local Jabra Setup server

which will configure the audio path. Follow the instructions shown on the

display. If your Jabra setup server is unavailable, contact your local Jabra

Support team.

Additional phone settings:

In version 2.5.1.2000, the DHSG mode is deactivated by default. You need

to activate it using Aastra.cfg or mac.cfg using the command “dhsg:1”.

Set the Audio mode to Headset/Speaker:

Options>Default settings>Audio settings>Audio mode>Headset/Speaker

Note

There is no possibility for remote call control when using an expansion

keypad.

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/4b3cba38-ca36-
4410-8a36-3e1fbff5b658

Page 4 of 4

Summary of Contents for Link 14201-10

Page 1: ...the RJ10 connector green from the split end of the Aastra DHSG cord into the headset socket 2 Plug the RJ45 connector yellow from the split end of the Aastra DHSG cord into the socket for the expansi...

Page 2: ...the complete phone symbol b Plug the RJ45 connector into the socket marked AUX 6 Follow the instructions on the Jabra device touchscreen a Select Phone settings b Select Connect to a desk phone 07 04...

Page 3: ...HSG 7 Set the phone setup switch to position A 8 We recommend setting the microphone volume to 7 out of 13 07 04 2021 01 15 https www jabra com supportpages jabra link 14201 10 14201 10 faq 4b3cba38 c...

Page 4: ...s In version 2 5 1 2000 the DHSG mode is deactivated by default You need to activate it using Aastra cfg or mac cfg using the command dhsg 1 Set the Audio mode to Headset Speaker Options Default setti...