11
EN
G
LI
SH
JABRA GO 6430
2.3 CONNECT TO SOFTPHONE (PC) USING THE JABRA LINK 350 USB
BLUETOOTH®
ADAPTER
Connecting to a PC using the Jabra LINK 350 USB
Bluetooth®
Adapter will allow connectivity with a PC softphone
(such as Microsoft Lync or Skype). Supported softphones have full functionality with the Jabra GO 6430 headset,
such as answering and ending calls with the headset multi-function button. Unsupported softphones have only
audio functionality with the headset, and have no interactivity with the headset call functions (such as answer/
end call). For the latest list of supported softphones, please visit the Jabra website at www.jabra.com/pcsuite.
Connect the Jabra LINK 350 USB
Bluetooth®
Adapter to a PC, and configure softphone audio
1. Install Jabra PC Suite using the supplied installation CD. Refer to the Jabra PC Suite section of this manual for
further information.
2. Plug the Jabra LINK USB 350
Bluetooth®
Adapter into any available USB port on the PC. The adapter will install
automatically when plugged in.
3. During the first three seconds the adapter LED will flash to indicate the current softphone mode (Microsoft Lync is
default-selected). To toggle between Microsoft Lync and standard softphones tap the adapter button during
the first three seconds.
4. After three seconds the adapter LED will indicate the current status of the Jabra GO 6430.
Adapter LED
Description
Solid green
The headset and adapter are paired and connected and the PC softphone is the
current target. Go to step 4.
Solid yellow
The headset and adapter are paired and connected and the mobile phone is the
current target. Go to step 4.
Flashing green
The headset and adapter are paired but not connected. Connection will occur
automatically if the headset is powered on and within range. The headset indefinitely
attempts connection when powered on, and the adapter LED will change to green or
yellow when connected. When connected go to step 4.
Solid blue
The headset and adapter are not paired. The adapter is in pairing mode. To pair the
headset and the adapter see the section below, Pairing the Jabra GO 6430 headset
with the Jabra LINK 350 USB
Bluetooth®
Adapter. Go to step 4 when paired and
connected (solid green or yellow LED).
5. The Jabra GO 6430 is now ready to use with your softphone (PC).
Pairing the Jabra GO 6430 headset with the Jabra LINK 350 USB
Bluetooth®
Adapter
The Jabra GO 6430 headset and Jabra LINK 350 USB
Bluetooth®
adapter are already paired from the factory.
The pairing procedure below is only necessary when the pairing is lost.
1. Attach the Jabra LINK 350 USB
Bluetooth®
adapter to the PC, and turn the PC on.
2. Put the Jabra LINK 350 USB
Bluetooth®
adapter in pairing mode by pressing and holding the adapter button
until the adapter LED turns blue.
3. If the headset is on, turn it off by pressing and holding the headset multi-function button until the headset
LED flashes red three times and turns off.
4. Put the headset into pairing mode by pressing and holding the headset multi-function button until the
headset LED turns blue.
5. Place the headset close to the Jabra LINK 350 USB
Bluetooth®
adapter and wait until pairing is successful.
When pairing is successful the adapter and headset LEDs will flash blue 5 times.
6. The headset and Jabra LINK 350 USB
Bluetooth®
adapter are now paired and connected.
