As soon as the dial tone signal can be heard in the headset, you can answer
the call by pressing the ”answer/end” button on the headset; by pressing
again the call is ended.
Phone setup:
For system software version 9.xx and higher:
No settings are required on the phone for the use of a headset. Following
the correct adaptation of the audio jack, a headset symbol should appear
in the “Phone display”. If the headset symbol does not appear, please
check the following settings:
Menu> Settings> Phone> Audio Jack> Select/ Activate Headset.
Phone setup with system software version below version 9.xx:
Important:
The “Force Headset” function must not be activated on the
phone, as otherwise it will not be possible to accept external calls!
Menu> Settings> Phone> Audio Jack> Force Headset OFF
Menu> Settings> Phone> Socket > Activate Headset
Dial tone signal transfer/ phone setup:
Important:
The dial tone signal in the headset is only transmitted if one of
12/02/2023 06:15
https://www.jabra.com/supportpages/jabra-gn9350e/9326-607-405/faq/307c489b-8b15-
4dd3-be2b-4d6ff48bc1c1
Page 3 of 4