Headset Set-up and Configuration Guide
5
Proprietary and Confidential – EarthLink Business
If you do not hear a dial tone in the headset, move the telephone termination switch along
the A – G range until the dial tone is clear.
Step 4
– Changing wearing style from headband to earhook
Remove the ear cushion if you have it on
Hold the headband as illustrated and press the headset receiver’s speaker with your
thumb
Match the “L” or “R” inside the ear plate with the square hole on the headset. Click the
earhook on to the headset receiver.
Step 5
– Change wearing ear (L or R)
Note: The buttons on the headset must be facing upwards. Then rotate the boomarm 180
degrees, before changing “L” and “R” wearing.
For wearing headband over your left ear turn the boomarm 180 degrees.
For wearing the earhook over your left ear, align the “L” inside the earhook with the
square hole on the headset, and press the earhook onto the headset receiver. Attached
the earhook to the earhook ring’s clutch. For wearing over your right ear, do the
opposite.
Step 6
– Answering/Ending a call
Lift the telephone’s handset out of its cradle when alerted to an incoming call
