4
5
2.1 GN 8210
– What’s in the box
• GN 8210 amplifi er with headset
stand
• Power adapter
• Telephone connection cord
• Quick Disconnect connector (to
connect headset’s cord)
Note:
The telephone and headset are not
included in the GN 8210 box.
3. Setting up the GN 8210
To set up the GN 8210, fi rst complete the assembly (3.1), then adjust for clear dial
tone (3.2) and transmit volume (3.3), and fi nally choose the audio mode (3.4).
3.1 Assembly
To connect the GN 8210 to your telephone, com-
plete the following:
1. Disconnect the handset cord from the tele-
phone’s handset socket, and connect it to the
handset socket (J) on the GN 8210.
2. Connect the telephone connection cord to the
telephone’s handset socket.
Note:
The telephone connection cord is already
connected to the GN 8210’s telephone socket
(K) from factory.
3. Connect the power adapter to the power
adapter socket (L) at the back of the ampli-
fi er, and then connect it to a power socket.
The
amplifi er indicates power connection
and functioning status with 2 seconds of
rapid fl ashing on the mute switch (F) and
on-line indicator (A).
4. Connect your headset to the headset con-
nection cord, using the Quick Disconnect
connector.
5. (Optional)
Insert the headsetstand to the back of the
amplifi er by pressing it in.
1558-979_RevA_20-06-2004_10sprog.indd 4-5
1558-979_RevA_20-06-2004_10sprog.indd 4-5
21-06-2004 11:29:10
21-06-2004 11:29:10
