Jabra CRUISER, User Manual

Page: 40 / 491

6
english
Jabra CrUISEr
2 Set your Bluetooth phone to ‘discover’ the Jabra CRUISER
- Follow your phone’s instruction guide . First make sure that
bluetooth is activated on your mobile phone . Then set your
phone to discover the speakerphone . This usually involves
going to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone
and selecting the option to ‘discover’ or ‘add’ a bluetooth device .*
3 Your phone will find the Jabra CRUISER
- Your phone will find the speakerphone under the name
“Jabra CrUISEr” .
- Your phone then asks if you want to pair with the speakerphone .
accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros) . Your phone will confirm
when pairing is complete .
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra CRUISER
Jabra CRUISER
OK
Passkey:
****
HANDSFREE
SELECT
Jabra CRUISER
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the speakerphone with a different phone, or
if the pairing process was interrupted, you can manually set the
speakerphone to pairing mode .
Turn the speakerphone on . Press and hold the answer/end button
for approximately 5 seconds until “pairing mode” is announced .
Then repeat steps 2 . and 3 . in the above pairing guide .
ConneCtInG WItH YoUR PHone
Pairing is only needed the first time a speakerphone and a phone
are used together . When the speakerphone and phone have
been paired once, they will automatically connect when the
speakerphone is on and bluetooth is activated on the phone . The
speakerphone can be used when it is “connected” to the phone .
If the devices are paired, but do not immediately connect, tap the
answer/end button .
* Phone dependent