Jabra 14201-17, Quick Start Manual

Page: 3 / 4

2. Set the phone setup switch to position "A".
3. Ask someone to call this phone and wait at least 10 seconds before
answering. The appropriate EHS mode will be set automatically.
4. Place a test call and adjust the volume level of the microphone.
Note :
All Polycom desk phones that support EHS functionality using the Jabra
Link 14201-17 require a change in the setup of the phone. Ensure you
make the change when the phone is not being used for an active call.
Use the following steps:
1. In the setup menu, navigate to Settings > Basic > Preferences >
Headset > Analog Headset (or Hook switch Mode ).
2. Change the default setting Regular Mode to the correct Jabra mode
by selecting Jabra DHSG or Jabra EHS , depending on the firmware
version of the desk phone.
3. Press the Select soft key.
09/03/2024 17:30
https://www.mea.jabra.com/supportpages/jabra-link-14201-17/14201-
17/faq/6bbfceb3-7635-426e-a2f4-a1dcfdd86c00 Page 3 of 4