JB-EXT-TH-R Wireless outdoor temperature detector
JB-EXT-TH-R Wireless outdoor temperature detector
2 / 2
MTQ51101
Batteries replacement
The system sends a report automatically when the batteries are
low. During the battery replacement it is not necessary to switch the
system to service mode (this detector has no tamper contact).
After taking out the battery, press the discharging button (4)
to discharge the capacitors in the detector and then insert
a new battery.
Apply the same procedure if you need to enroll the detector
to a different control panel. Only one battery can be used in the
detector. To prolong the detector lifetime use another battery
CR123A. When using two batteries always replace both batteries in
the same time and use the same type and brand of fully charged
batteries.
External sensor JA-TS-PT1000
The external sensor is not included in the JB-EXT-TH-R package.
The length of the conductors is 3 m and can be extended. However
the conductor extension can cause a measurement deviation.
Follow the recommended wire gauges listed below when extending
the conductors.
Wire length
10 m
20 m
30 m
Minimal wire gauge
0,5 mm
2
0,8
mm
2
0,8
mm
2
Measurement deviation
+ 0,1 °C
+ 0,15 °C
+ 0,2 °C
Table 1: External sensor JB-TS-PT1000 extension
Technical parameters
Power
2x Lithium battery type CR123A (3.0 V/1500 mAh)
Please note: Batteries are not included
Current consumption (nominal/maximal)
15
μ
A/50 mA
Typical battery lifetime
(applies if the electronics are placed in
a non-condensing environment with temperature of 0 °C to +30 °C
and relative humidity of 10% - 90% rH).
Sensor type / number of batteries
1x CR123A 2x CR123A
Internal
5 years
10 years
External (JB-TS-PT1000)
2 years
4 years
Low battery reporting
< 2.4 V
Communication band
868.1 MHz, JABLOTRON protocol
RF range
up to 200 m (open area)
Dimensions
90 x 110 x 35 mm
Weight 145
g
Internal sensor temperature measurement range
-25 °C to +60 °C
External sensor temperature measurement range -50 °C to +200 °C
Operational temperature
-25 °C to +60 °C
Internal sensor temperature measurement range accuracy ±0.6 °C
External sensor temperature measurement range accuracy
±1 °C
IP coverage
IP53
Also complies with
ETSI EN 300 220, EN 60950-1,
EN
50130-4,
EN
55022
JABLOTRON ALARMS a.s. hereby declares that the
JB-EXT-TH-R
is in a compliance with the relevant European union harmonisation
legislation: Directives No: 2014/53/EU, 2014/35/EU, 2014/30/EU,
2011/65/EU. The original of the conformity assessment can be found
at
www.jablotron.com
- Section Downloads.
Note:
Although this product does not contain any harmful materials
we suggest you return the product to the dealer or directly
to the producer after use. For more detailed information visit
www.jablotron.com