JA-80Z Radio signal repeater
2 / 2
MKG51302
+
fig. 1 Repeater box layout
Description: 1. Antenna connector; 2. Wireless module; 3. Signal strength indication LED; 4. Reset jumper; 5. DIP switch for settings;
6. Terminals; 7. Magnet part of the rear tamper contact; 8. Rear tamper contact; 9. Optional beeper; 10. Mains fuse (T200 mA);
11. Transformer; 12. Box cover tamper contact
Technical specifications
Power source
230 V/50 Hz, max 0.1 A, protection class II
Power supply
type A (EN 50131-6)
Backup battery
12 V, 2.6 Ah
Backup power output
maximum continuous load 0.7 A
Number of wireless device addresses
40
Hard-wired inputs
1x double balanced input
1x input reserved for the rear tamper contact
EW external warning output
switching to GND, max. 0.5 A
IW internal warning output
switching to GND, max. 0.5 A
PGX, PGY outputs
max. 0.1 A, switching to GND
Frequency band (JA-82R)
868 MHz
Security grade
2
according to EN50131-1, EN 50131-3, EN 50131-6 and EN 50131-5-3
Environmental class
II. indoor-general (-10 to +40°C)
compliant with EN 50131-1
Radio emissions
ETSI EN 300220
EMC
EN 50130-4, EN 55022
Safety
EN 60950-1
Can be operated according to
ERC REC 70-03
Jablotron Alarms a.s. hereby declares that the JA-80Z
repeater is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
original of the conformity assessment can be found on
the web site
, Technical Support
section.
Note
: Dispose of batteries safely depending on battery
type and local regulations. Although this product does not
contain any harmful materials we suggest you return the
product to the dealer or directly to the manufacturer after
use.
fig. 2 Repeater box dimensions