
JA-155P Wireless ceiling PIR motion detector
JA-155P Wireless ceiling PIR motion detector
2 / 2
MOM51101
Detection characteristics
The detector is fitted with a 360° lens which covers the monitored
space with 3 main circular zones separated into 64 beams. The lens
cannot be replaced by a different type.
The maximum recommended installation height is 3.5 m (installing
the detector higher will lead to a lower sensitivity underneath the detector).
Figure 3: The above diagrams apply only to the standard immunity level.
Technical specifications
Power
2x lithium batteries, type CR123A (3 V/1500 mAh)
Warning: batteries are not included.
Number of batteries
1x CR123A
2x CR123A
Lifetime (Smartwatch mode)
2 years
4 years
Low battery voltage
< 2.4 V
Communication band
868.1 MHz, JABLOTRON protocol
RF range
up to 300 m (open area)
Recommended installation height 2.5 – 3.5 m above the ground level
Detection coverage
360° / 11 m (installation height – 3.5 m)
Dimmensions
Ø125x40 mm
Weight (without batteries)
124 g
Classification
security grade 2
/II. Indoor general
(according to EN 50131-1)
Operational environment
indoor general
Operational temperature range
-10 °C to +40 °C
Average operational humidity
75 % RH, non-condensing
Certification body
Trezor Test s.r.o. (no. 3025)
Complies with
EN 50131-1 ed. 2+A1+A2, EN 50131-2-2,
EN 50131-5-3+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1,
EN 55032, EN 62368-1, EN 50581
Can be operated according to
ERC REC 70-03
JABLOTRON ALARMS a.s. hereby declares that the JA-155P
detector is in a compliance with the relevant European Union
harmonisation legislation: Directives No: 2014/35/EU, 2014/30/EU,
2011/65/EU. The original of the conformity assessment can be found
at www.jablotron.com – the Downloads section.
Note:
Although this product does not contain any harmful materials
we suggest you return the product to the dealer or directly
to the producer after use.