CU-07A Tracer unit
4/4
MKW51604
E
8
5.5. SMS command reception confirmation
The device can confirm execution of the received SMS
commands to the telephone number from which the command was
received. This function is optional, though.
Command format: UCcode RE ON/OFF
Command example:
1111 RE OFF (disables confirmation of SMS commands)
5.6. Ascertaining the current position
The current position of the unit can be ascertained by sending a
GPS command. The received SMS contains a link to Google maps
which smart phones can then use to display the vehicle position on
the map.
Command format: UCcode GPS
Example of a command to ascertain the current position:
1111 GPS
5.7. Current vehicle status
The current vehicle status can be ascertained with the STATUS
command. The unit reacts to this command with an answer stating
the current status of the unit.
Command format: UCcode STATUS
Command example:
1111 STATUS
5.8. HELP command
The HELP command can be used to obtain basic help about
how to control the unit using SMS commands.
Command format: UCcode HELP
Command example:
1111 HELP
5.9. CREDIT and LOCATOR commands
If the CREDIT and LOCATOR functions have already been set,
single commands can be used to ascertain the credit balance and
position.
Command format: UCcode CREDIT
Example of a command for ascertaining the credit balance on a
prepaid card:
1111 CREDIT
Command format: UCcode LOCATOR
Example of a command for ascertaining the position in a mobile
operator’s network:
1111 LOCATOR
6. Other functions
6.1. Forwarding of unidentified SMS messages
The unit forwards all SMS messages which it is unable to identify
by password or by the caller’s number to the TEL1 number. These
could be messages from the operator concerning the credit
balance, information about changes to flat-rate tariff terms and
conditions, one-time passwords, etc.
This function also serves as protection against possible testing
by an unauthorized person trying to break the unit’s code.
The forwarded SMS always contains the telephone number from
which the message was sent and the wording of the message with the
exception of the first word which is replaced with asterisks. The
maximum number of forwarded SMS messages is 10 per 24 hours.
6.2. Unit reset
The unit can be reset to default via an SMS command.
Note: In such a case all parameters will be reset to default.
Command format: MCcode RESET MASTER
Example of a command for unit reset:
1234 RESET MASTER
7. Technical specifications
Power supply voltage
8 - 30 V
Maximum current consumption
500 mA /12 V
Nominal current in on-line mode
50 mA /12 V
Standby current consumption
14 mA /12 V
GSM band
800/900/1800/1900 MHz
Dimensions without the terminals and mounts
L x W x H
160 x 42x 19 mm
Unit weight
90 g
Operating temperature range
-20 to +80
℃
Intended for connection to a +12 V or +24 V DC vehicle power
supply. The unit is intended for operation in road vehicles.
This product is identical to the type approved by the Ministry of
Transportation of the Czech Republic under the number
E8 10R-03 5144.
10R – 03 5144
JABLOTRON ALARMS a.s. hereby declares that the
CU-07A is in a compliance with the relevant Union
harmonisation legislation: Directives No: 2014/53/EU,
2014/35/EU, 2014/30/EU, 2011/65/EU. The original
of the conformity assessment can be found
Note:
Although this product does not contain any
harmful materials we suggest you return the product
to the dealer or directly to the producer after use.
