The car alarm can be either controlled with the original car remote control,
or with a JABLOTRON remote control, or a combination of these methods.
Follow the respective paragraph that corresponds to the installation type in your car.
Setting
– press the key on the remote control
to set the car alarm. If the car alarm is interconnected
with the central locking, the vehicle is locked
at the same time.
Partial setting
– repeatedly press the
key (within 15 s of setting) to partially set the car
alarm. In this mode, some wired and wireless
detectors are not active. E.g. the car can be loaded
onto a train or ferry without triggering a tilt alarm,
or you can move inside a caravan. At the same time,
the sensor of vehicle voltage dips is not active.
Unsetting
– use the
key on the remote control to
unset the car alarm. If the car alarm is interconnected
with the central locking, the vehicle is unlocked
at the same time.
Setting
– the car alarm is set together with locking
the vehicle.
Partial setting
– repeatedly press the lock key
to partially set the car. In this mode, some wired
and wireless detectors are not active. E.g. the car
can be loaded onto a train or ferry without triggering
a tilt alarm, or you can move inside a caravan.
At the same time, the sensor of a vehicle voltage drop
is not active.
Caution!
This function is not available
in all vehicle types through the car remote control.
In such a case it can be replaced by phone control
(a smartphone app, ringing or SMS).
Unsetting
– the car alarm is unset together
with unlocking the vehicle.
a) Using the original car remote control
b) Using a JABLOTRON remote control
4
/ CONTROL
