- 15 -
Night vision
The.EyeSee.can.see.not.only.visible.light.but.as.a.professional.security.camera.it.has.excellent.
sensitivity.also.in.the.infra-red.spectrum,.which.is.invisible.to.the.human.eye..When..dark.the.
camera.switches.ON.its.infrared.lights.to.invisibly.illuminate.the.scene..
Tips:
.
•.
Pictures.taken.in.infrared.light.are.black.and.white.
•.
When.its.internal.IR.lamp.is.used.there.must.NOT.be.anything.in.close.distance.in.front.of.the.
camera.as.it’s.reflection.would.dazzle.the.camera.
•.
The.built-in.infrared.light.is.designed.for.indoor.use.and.its.power.may.not.be.sufficient.for.
outdoor.usage..Read.more.about.additional.IR.lamps.installation.for.outdoor.use..
at support.jablocom.com/eyesee.
Outdoor installation
The.EyeSee.can.be.installed.outdoors..Ensure.that.it.is.protected.from.permanent.exposure.to.
direct.rain.or.snow,.e.g..by.a.small.shelter..
Tips:
•.
Some.of.the.detectors.should.be.disabled.for.outdoor.use..For.example.the.noise.or.touch.
detector.may.be.triggered.by.wind.and.cause.false.alarms.
•.
The.USB.cable.must.be.disconnected.from.the.camera.body.and.the.USB.connector.on.the.
back.side.must.be.protected.by.the.rubber.seal.
•.
For.more.information.about.outdoor.installation.see.application.notes.at.support.jablocom.
com/eyesee.
Wireless peripherals
The.EyeSee.camera.can.be.used.with.wireless.peripherals.that.extend.the.camera’s.functionality.
(more.at.www.jabloshop.com)..Examples.of.compatible.devices:
Panic button (RC-87)
Camera.sends.alarm.report.
when.someone.presses.the.
button.
Fire detector (JA-80S)
Detector.sounds.and.camera.
reports.alarm.to.mobile.phone.
when.there.is.a.fire.or.smoke.
Internal siren (JA-80L)
Sounds.when.camera.reports.......
activity.in.the.protected.area.
Smart socket (AC-88)
Camera.can.remotely.turn.the.
socket.ON.or.OFF.
Other features
•.
The.EyeSee.turns.its.image.up-side-down.when.it.is.mounted.on.the.ceiling.
•.
An.internal.buffer.will.allow.you.to.always.view.the.proceeding.6.seconds.to.any.alarm..
•.
To.get.current.picture.from.the.camera.send.text.message.“picture”.to.the.camera.and.you.will.
soon.receive.an..MMS.from.the..camera..To.get.status.of.the.camera,.use.text.message.“status”.
•.
If.the.text.message.command.is.sent.from.a.mobile.phone.which.is.not.saved.as.a.contact..
in.your.camera,.it.must.be.proceeded.by.the.camera’s.password,.otherwise.it.will.be.ignored..
The.default.camera.password.is.“0000”..If.you.changed.the.camera.password.during.the.
installation.then.replace.the.default.camera.password.“0000”.with.your.own.password.
