JR_EYE‐02.ENG.MAN.MANUAL.10.DOCX
‐ 10 ‐
including the video records.
Example:
<Configuration Password> CONFIG CONTACT
+420774770123
The phone 420 774 770 123 will be added to the EYE‐02 camera
contact list, the ALARM reports will be sent to this e‐mail address including
the video records
CONFIG LANG <language>
Change the EYE‐02 camera language settings. Check your camera
production settings to get a list of supported languages.
Example
:
CONFIG LANG GER
changes the default language to
German.
CONFIG DELAY <time>
Change the Exit delay timer setting, <time> is time in seconds
Example
:
CONFIG DELAY 25
sets the exit delay to 25 seconds
CONFIG POWER <mode>
Change of power mode, <mode> can be
N O R M A L
N O R M A L
or
B A T T E R Y
B A T T E R Y
Example
:
CONFIG POWER BATTERY
changes power mode to
B
B
A T T E R Y
A T T E R Y
mode
CONFIG DATE
Set date and time in format YYYY‐MM‐DD HH:MM:SS
Example
:
CONFIG DATE 2009‐10‐24 08:34:02
4.4
E
VENT
R
EPORTS
Every event detected by the EYE‐02 camera is recorded into the camera’s memory.
The event record consists of the date and time mark, detail description of the event (including its source)
and a video record.
Example of Events history viewed by the JabloTool software:
There are many types of event records. The most important are the ALARM reports which are immediately reported to
the contacts from the contact list. Other types of records are the ALERT records (similar to ALARM but ALERTs are not
reported to the contacts) or some technical reports (Example: information about the AC power failure).