JabloCom Essence GDP-06i, Quick Start Manual, Page: 6 / 8

Repair Guide for GDP‐06i
3. Final Test
3.1 Introduction
This chapter describes final testing of GDP­06i.
3.2 Prerequisites
Before you start final testing of GDP­06i please prepare the following:
1. 1x tested GDP­06i + power adaptor
2. Charged battery (3.9 to 4.2V)
3. 1x PC
4. 1x mini USB cable (it’s a content of the GDP­06i package)
5. 1x valid SIM card
6. 1x barcode reader
7. another working phone as the other side for call test (loopback phone recommended).
You have received from JABLOCOM:
1. software GDPFinalTest
2. final test configuration file GDPFinalTest.exe.config
3.3 Preparation
1. Download the current version of GDP06FinalTest from
http://www.jablocom.com/essence­final­test and install it on your PC.
2. Now open the file GDPFinalTest.exe.config in a text editor (e.g. Notepad). It is a simple XML file.
Find the row
<add key=”PHONE_NUMBER” value=”xxx” />
and replace xxx with number of the phone for call test.
3. Copy the file GDPFinalTest.exe.config to application folder (by default C:\ProgramFiles\
JabloCOM\GDPFinalTest). If you already have one there, replace it.
4. Connect barcode reader to the PC.
3.4 Testing process
Run the application GDPFinalTest.exe as administrator. Then follow this guide:
● Insert a charged battery into the battery slot and a functional SIM card into the SIM slot. Connect
the PC to the phone using the delivered USB cable. The phone should switch on automatically. If
it doesn't, switch it on manually.
● After the phone starts up please insert the code *##00#
● FinalTest asks you for IMEI. Use your barcode reader and scan it from the phone body. Then the
application starts testing. If you don’t have a barcode scanner type the IMEI manually.
● Watch the application. You see list of tests. Tests not yet performed are marked as NOT
TESTED . Tests successfully performed are marked with green OK . Test being performed at the
moment is marked with yellow TESTING . If a test fails, then the whole final test's result is
ERROR .
● First the application performs tests IMEI , AC , SOFTWARE VERSION and GSM VERSION .
These tests are done automatically.
XI.Repair_guide.01.A.docx
6