![background image](http://html2.mh-extra.com/html/jabiru/j160/j160_technical-manual_3118859213.webp)
Aircraft Technical Manual
Jabiru Aircraft
Pty Ltd
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 213 of 298
Figure 155
– 3300 Exhaust System Type 2 (J200/J400, J230/J430, J250/J450)
7.11 Cabin Heater System (all J-Series)
7.11.1 Description
A cold-air inlet is fitted to the front of the engine cowls. From here the air flows through a heat
exchanger installed on the exhaust tailpipe, through a control valve and into the cabin.
WARNING
A malfunctioning cabin heat system has potential to release harmful gases such as carbon
monoxide into the cabin. Aircraft equipped with a cabin heater must also be fitted with a
current carbon monoxide detector tag at all times.
7.11.2 Cabin Heat Removal
Required Tools:
Fine nose pliers
Screwdrivers
Parts and Material:
N/A
Type of Maintenance:
Line Maintenance
Level of Certification:
L2 or LAME (A&P or LSA Repairman / Maintenance)
Return to Service:
L2 or LAME (A&P or LSA Repairman / Maintenance)
For the control valve:
-
Disconnect spring from Lever arm.
-
Remove Split Pin from cable locking pin.
-
Remove locking pin, disconnect control cable.
-
Loosen hose clamp screws.
-
Remove hose.