Jabiru Aircraft
Pty Ltd
Aircraft Service Manual
Jabiru J160 / J170 Variants
22
APPENDIX IV – PROPELLER SERVICE MANUAL
22.1 CERTIFIED PROPELLER MODELS
C000242 series propellers with a serial number of 2900 or higher and 4A401 series propellers
with a serial number of 002 must be maintained in accordance with Propeller Technical Manual
JPM3L01. The information given below is not applicable to these propellers.
Operators with earlier propellers may also use manual JPM3L01 for reference, but must be
aware that there may be differences between the propellers detailed in the manual and their
own.
22.2 APPROVED INSTALLATIONS
The following combinations are approved.
Table 24
– Approved Propeller Installations
Airframe
Engine
Propeller
Dia x Pitch
Remarks/Limits
Jabiru J160-C
Jabiru 2200
C000242
or
4A401 Series.
1524 x 1067
(60” x 42”)
Not above 3300 RPM
Jabiru J160-D,
J170-C, J170-D
Jabiru 2200
C000242
or
4A401 Series.
1524 x 1067
(60” x 42”)
Not above 3300 RPM
Sensenich 2-
bladed Fixed
pitch wooden.
1524 x 1092
(60” x 43”)
or
1524 x 1168
(60” x 46”)
Not above 3300 RPM
Other Jabiru J160
& J170 Variants.
J120-C
Jabiru 2200
C000242
Series
1524 x 1117
(60” x 44”)
or
1524 x 1067
(60” x 42”)
Not above 3300 RPM
J200, J230, J250 &
Variants, including
J230-C, J230-D
Jabiru 3300
C000262
Series
1524 x 1346
(60” x 53”)
or
1524 x 1397
(60” x 55”)
Not above 3300 RPM
Sensenich 2-
bladed Fixed
pitch wooden.
1524 x 1346
(60” x 53”)
or
1524 x 1397
(60” x 55”)
or
1524 x 1422
(60” x 56”)
Not above 3300 RPM
22.3 IDENTIFICATION STAMPINGS
Each Jabiru propeller is marked with the particulars indicated below:
1.
The Propeller Drawing Number.
2.
The diameter and pitches in metres, preceded by the letters "D" and "P" respectively.
3.
The type of engine for which the propeller has been designed.
4.
Manufacturing Serial Number:
