![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313032.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 32 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
Figure 24
– Degree Wheel
Figure 25
– Supplementary Oil Pressure Gauge
Figure 26
– Crankshaft Run-Out Test Bed
A test bed to simplify measuring crankshaft and propeller flange run-out. This can also be done in a
crankcase half.
Figure 27
– Ignition Coil Tester
A degree wheel or degree disc
– used during engine assembly to
check engine timing.
Used during initial engine proof runs and / or running-in. Used as a
more accurate gauge to confirm the readings of the standard aircraft
oil pressure gauge. Fitting uses 1/8 NPT thread.
Used to test ignition coil
performance.