![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_overhaul-manual_3122313141.webp)
Engine Overhaul Manual
Jabiru Aircraft
Pty Ltd
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
6 7
Dated : 28/10/2014
Issued By: AS
Page: 141 of 201
L:\files\Manuals_For_Products\Engine_Manuals\Overhaul_Manual\JEM0001-7_Overhaul_Manual_DRAFT_(29_10_14).docx
7.8.9 Distributor Caps
Figure 177
– Distributor Cap Installation
Fit the distributor cap to the mount plate using the clamps & cap screws. Note that the cap must fit
tightly
– if there is any movement in the cap once the clamps have been tightened then a new cap may
be required. In early engines these clamps tended to be slightly too long so clamps may be modified
–
inspection of the cap will show if it has worn or if the clamps are the wrong length.
Distributor cap fitted