Jabbla Mobi 3, Manual

Page: 45 / 54

Mobi 3
1 Maintenance
1.1 Repairs
In the event of damage to the device, please contact the distributor of the device.
Do not attempt to carry out any repairs yourself. This could damage the device and invalidate your warranty.
1.2 Cleaning the device
Clean the device regularly so you do not give bacteria the chance to spread.
It is best to remove dust with a dry, soft cloth. For minor stains on the casing, use a damp cloth. Make sure no moisture can enter through the speaker openings,
the microphone opening or the connectors. Any dirt near the connectors can be removed with a cotton bud.
To clean the touch screen, use a dry cloth; do not use kitchen paper as this may cause tiny scratches. To remove grease or stains from the screen, it is
recommended that you use cleaning agents specifically designed for cleaning screens (aerosol or wipes). Do not press too hard on the screen when cleaning.
It is best to clean the carry case with a dry or slightly damp cloth. The carry case can also be cleaned with a soft brush.
1.3 Replacing the battery
1. Shut down the device. See Shutting down the Mobi on page 32.
Ensure that the device is disconnected from the power supply.
2.
As required, remove the device from its mounting.
3.
Use a cloth to place the device on, with the screen facing down on the cloth.
4. Fold open the tray stand (14).
CAUTION
Never loosen the screws of the tray stand!
5. Loosen the screws (25) and remove the cover (26).
G Maintenance and troubleshooting
1 Maintenance
43