J5create JUE220 Quick Installation Manual Download Page 2

Limited Warranty

• Microsoft Windows 8.1 / 8 / 7 / Vista / XP (32-bit or 64-bit) 

• Mac OS X v10.6~v10.10

• Linux Kernel 3.x / 2.6.x

• Verfügbarer USB Port (USB 3.0 wird empfohlen) 

• Treiber für Windows 8.1 erforderlich / Linux 3.x / Chrome OS 3.8

• Treiber wird automatisch unter Windows zu installieren 7.8 / XP (Internet-Zugang 

erforderlich)

• Microsoft Windows 8.1 / 8 / 7 / Vista / XP (32-bit or 64-bit) 

• Mac OS X v10.6~v10.10

• Linux Kernel 3.x / 2.6.x

• Port USB disponible (USB 3.0 est recommandé) 

• Pilote pas nécessaire pour Windows 8.1 / 3.x Linux / Chrome OS 3.8

• Pilote installera automatiquement sur Windows 8/7 / XP (nécessite un accès Internet)

Windows - 驅動程式安裝流程 

Mac 10.5~10.9 - 驅動程式安裝流程 

步驟1

我們強力建議直接造訪www.j5create.com/tw/

「技術支援」

下載

最新版驅動程式

來進行

安裝。

若無法連接網路下載,將驅動程式光碟放入光碟機中,安裝精靈會自動開始執行。 如
果自動安裝沒有執行,可手動啟動安裝,請至

「電腦」

下點選「磁碟機」,並雙擊

Setup.exe」

即可。

步驟2

跟著螢幕提示安裝驅動程式。 (你可能需要至

「我的電腦」>「下載項目」

點選 

j5UsbDisplayAdapter

打開檔案開始安裝) 驅動程式成功安裝後,請點選

「完成」

立即

重新開機

步驟3

請重複步驟1∼4安裝在另一台電腦。

步驟4

LAN網路線

連接至j5create 雙USB共享外接網卡的LAN接頭端,

再插入二台

電腦USB

埠。裝置驅動程式將進行安裝,隨後j5create 雙USB共享外接網卡即可使用。

Windows - ドライバーのインストール

Mac - ドライバーのインストール

手順 1

www.j5create.com/jpn/ の

"ダウンロード"

から、

最新版ドライバー

をダウンロードして下さい。

インターネット接続環境がない場合、

コンピューターのCD-ROM ドライブにドライバーCDを挿入し、

インストールを開始します。
セットアッププログラムは自動的に起動しますが、もし自動的に起動しない場合は、

マイコンピューター

(または コンピュータ ―)

を開き、その中にあるドライブのアイコンを開き、

Setup.exe  

をダブル

クリックして手動でセットアップCD を実行してください。

手順 2

ドライバーのインストール

を選択し、インストールを開始します。インストール終了後、

"完了"

を選び、コ

ンピューターを

再起動

して下さい。

手順 3

別のコンピュータにインストールするには、

手順1〜4

を繰り返してください。

手順 4

初めに

LANケーブルを本製品のRJ45コネクターに接続して下さい。

次に

本製品をご使用の

両方

のコ

ンピューターに接続して下さい。ソフトウェアの実行には数分かかる場合があります。その後本製品が使
用可能になります。

必須環境

• 

Microsoft Windows 8.1 / 8 / 7 / Vista / XP (32-bit or 64-bit) 

• 

Mac OS X v10.6-v10.10

• 

Linux Kernel 3.x / 2.6.x

• 

利用可能なUSBポート(USB 3.0を推奨)

• 

Windows 8.1/ Linux 3.x / クローム OS 3.8 はドライバのインストールが必要はありません

• 

Windows 8/7/XPのドライバが自動的にインストールされています(インターネット接続するは必要です)

使用環境需求

• 

Microsoft Windows 8.1 / 8 / 7 / Vista / XP (32-bit or 64-bit) 

• 

Mac OS X v10.6~v10.10

• 

Linux Kernel 3.x / 2.6.x

• 

USB埠(建議使用USB 3.0)

• 

Windows 8.1 /Linux 3.x / Chrome OS 3.8不需裝驅動

• 

Windows 8 / 7 / XP驅動會自動安裝(必需連網)

Française

日本語

繁中文

System Requirements

Étape 1

Étape 3

Étape 2

手順 1

手順 3

手順 2

Étape 1

Étape 3

Étape 2-1

Étape 2-2

手順 1

手順 3

手順 2-1

手順 2-2 

步驟1

步驟3

步驟2-1

步驟2-2

• Microsoft Windows 8.1 / 8 / 7 / Vista / XP (32-bit or 64-bit) 

• Mac OS X v10.6~v10.10 

• Linux Kernel 3.x / 2.6.x

• Available USB port (USB 3.0 is recommended)

• Driver not required for Windows 8.1 /Linux 3.x / Chrome OS 3.8

• Driver will automatically install on Windows 8 / 7 / XP(Requires Internet access)

Systemanforderungen

Windows - Installation

Mac - Installation

Environnement requis

Étape 1

Télécharger Pilote est disponible à sur www.j5create.com dans la rubrique 

«soutien 

/téléchargement» 

domaine

 

Pour commencer, insérez le CD de pilotes dans le lecteur de CD-ROM de votre 

ordinateur. Le programme d'installation devrait se lancer automatiquement. Si 

l'exécution automatique ne démarre pas, allez à 

«Poste de travail»

, cliquez sur votre 

lecteur optique, et lancez manuellement le CD d'installation en double-cliquant sur 

«Setup.exe»

Étape 2

Suivez les instructions pour installer le pilote. (Vous pouvez avoir à cliquer sur 

Poste 

de travail> téléchargements 

et choisissez 

j5UsbEthernetAdapter

 pour commencer 

l'installation.) Lorsque l'assistant d'installation est terminé. Cliquez sur 

Terminer

 pour 

Redémarrer.

Étape 3

Se il vous plaît répétez les 

étapes 1 ~ 4 

pour installer sur un autre ordinateur.

Étape 4

Branchez le 

câble LAN

 au connecteur de la Dual USB partage adaptateur Ethernet 

j5create RJ-45, 

puis à deux ordinateurs.

 Traitement informatique prendra quelques 

minutes. Afterthe traitement logiciel est terminée, vous serez prêt à utiliser votre 

j5create Dual USB partage adaptateur Ethernet !.

步驟1

步驟2

步驟3

ドライバーのインストールが完了してから、

Dual USB Ethernet Sharing Adapter の
USBケーブルを両方のコンピュータのポート
に挿入してください。

驅動程式安裝完成之前,

請勿

雙USB共享外接網卡接到

二台

電腦

的USB埠上。

Entorno requerido 

• Microsoft Windows 8.1 / 8 / 7 / Vista / XP (32-bit or 64-bit) 

• Mac OS X v10.

6~v10.10

• Linux Kernel 3.x / 2.6.x

• Puerto USB disponible (se recomienda USB 3.0)

• El conductor no se requiere para Windows 8.1 / Linux 3.x / Chrome OS 3.8

• El conductor se instalará automáticamente en Windows 8/7 / XP (requiere conexión a 

Internet)

Étape 1.

Télécharger Pilote est disponible à sur www.j5create.com dans la rubrique 

«soutien 

/téléchargement»

 domaine. (Remarque: Si vous avez des difficultés à télécharger ce 

pilote vos paramètres de sécurité peuvent avoir besoin d'être ajustée pour permettre 

"le téléchargement de n'importe où"

)

Pour commencer, insérez le CD de pilotes dans le lecteur de CD-ROM de votre 

ordinateur. Cliquez sur 

Chercheur

 sous 

Périphériques

 choisir 

j5create

. Click on 

«mac_install»

 folder and open 

 «dmg»

 file.

Étape 2

Choisissez le système d'exploitation correspondant à votre système et suivez les 

instructions pour installer le pilote. (Vous pouvez avoir à cliquer sur

 Poste de 

travail> téléchargements 

et choisissez 

j5UsbEthernetAdapter

 pour commencer 

l'installation.) Lorsque l'assistant d'installation est terminé. Cliquez sur Redémarrer 

pour Terminer.

Étape 3

Se il vous plaît répétez les 

étapes 1 ~ 4 

pour installer sur un autre ordinateur.

Étape 4

Branchez le 

câble LAN

 au connecteur de la Dual USB partage adaptateur Ethernet 

j5create RJ-45, 

puis à deux ordinateurs

. Accédez à (        ), puis 

Préférences 

Système

. Choisissez l'onglet 

Réseau 

pour ajuster. Sélectionnez 

AX88179 USB 3.0 

Gigabit Ethernet. 

Maintenant, vous êtes prêt à utiliser votre j5create Dual USB 

partage adaptateur Ethernet!

手順 1

www.j5create.com/jpn/ の

"ダウンロード"

から、

最新版ドライバー

をダウンロードして下さい。

インターネット接続環境がない場合、

コンピューターのCD-ROM ドライブにドライバーCDを挿入し、

インストールを開始します。CD-ROM ドライブにドライバー CD を挿入し、ファインダー上に現れる

j5createのCDアイコン

を選択、

mac install

フォルダをクリックし、

dmg

ファイルを開いてください。

手順 2

ご使用のOSバージョンを選択し、

ドライバーのインストールを選択、インストールを開始します。インス

トール終了後、

"完了"

を選び、コンピューターを

再起動

して下さい。

手順 3

別のコンピュータにインストールするには、

手順1〜4

を繰り返してください。

手順 4

初めに

LANケーブルを本製品のRJ45コネクターに接続して下さい。

次に

本製品をご使用の

両方

のコ

ンピューターに接続して下さい。

次に

(        ) をセレクトし、

システム環境設定

 ネットワーク

また

は 調整 タブを選択して、設定を行います。

"AX88179 USB 3.0 to Gigabit Ethernet"

を選択し

てください。その後本製品が使用可能になります。

步驟1

我們強力建議直接造訪www.j5create.com/tw/

「技術支援」

下載最新版驅動程式來進行

安裝。
(注意: 如果下載驅動發生問題,請將安全性設定選擇為「下載自任何來源」)

若無法連接網路下載,將驅動程式光碟放入光碟機中,點擊Finder中的設備下選擇

j5create

。點擊

「mac_install」

文件夾並打開

dmg

檔案。

步驟2

正確選擇你的系統版本開始安裝,跟著螢幕提示安裝驅動程式。 (你可能需要至

「我

的電腦」>「下載項目」

點選 

j5UsbDisplayAdapter

打開檔案開始安裝) 驅動程式成功

安裝後,請點選完成 立即重新開機。

步驟3

請重複步驟1∼4安裝在另一台電腦。

步驟4

LAN網路線

連接至j5create 雙USB共享外接網卡的LAN接頭端,

再插入二台

電腦USB

埠。在(       ) 點選

「系統偏好設定」

選擇

「網路」

調整. 請選擇

「AX88179 USB 3.0 

to Gigabit Ethernet」

。隨後j5create 雙USB共享外接網卡即可使用。

●  

Merci d'avoir acheté l'j5create Dual USB partage adaptateur Ethernet! 

j5create'sDual USB partage adaptateur Ethernet permet aux utilisateurs de partager 

une connexion Ethernet entre deux équipements. Mac et Windows sont supportées.

●  

このたびは

j5create Dual USB Ethernet Sharing Adapter

をお買い上げくださいまして、誠

にありがとうございます。本製品は、2つのデバイス間でイーサネット接続を共有することができます。 
MacとWindowsがサポートされています。

  

感謝您購買

j5create雙USB共享外接網卡

! 本產品能讓用戶輕易共享兩個設備之間

的網路,同時支持MAC 或 Windows。

j5create offers a limited 1-year warranty. User’s wear & tear damage is not included.

The user shall call or e-mail j5create's customer service with information regarding 

the defect(s) of the product and obtain a return authorization number. Users are 

responsible for one way return freight cost and we will take care of one way freight 

back. In order to obtain a return authorization number, users should have the 

following information handy when calling or emailing the service team:

(i)    a copy of the original purchase invoice to verify your warranty 

(ii)   a product serial number 

(iii)  a description of the problem

(iv)   customer’s name, address, and telephone number

j5create

 does not warrant that the operation of the product will be uninterrupted or 

error-free.  

j5create 

is not responsible for damage arising from failure to follow 

instructions relating to the product’s use. This warranty does not apply to:(a) 

consumable parts, unless damage has occurred due to a defect in materials or 

workmanship; (b) cosmetic damage, including but not limited to scratches, dents , 

and broken plastic on ports; (c) damage caused by use with non-

j5create 

products; 

(d) damage cause by natural disasters (flood, fire, earthquake, lighting strike, 

typhoon etc.,); (e) damage caused by human misuse (lost, accident, abuse, misuse or 

other external causes); (f) damage caused by operating the product outside the 

permitted or intended uses described by 

j5create

; (g) damage caused by service 

(including upgrades and expansions) performed by anyone who is not a representa-

tive of 

j5create

 or a 

j5create

 Authorized Service Provider; (h) a product or part that 

has been modified to alter functionality or capability without the written permission 

of 

j5create

; or (i) if any 

j5create

 serial number on the product has been removed or 

defaced. If such a situation occurs, 

j5create

 will calculate the cost of materials and 

repair for your reference. This warranty is given by 

j5create

 in lieu of any other 

warranties expressed or implied.

Copyright© 2015 j5create. All rights reserved.  All trade names are registered 

trademarks of their respective owners. Features and specifications are subject to 

change without notice. Product may not be exactly as shown in the diagrams.

Ne branchez 

pas

 le Dual USB partage 

adaptateur Ethernet j5create jusqu'à 

ce que le conducteur est complète

-

ment installé sur les 

deux

 ordinateurs.

Reviews: