www.j2systems.net
(801) 701-7979
PRODUCT
ASSEMBLY
AND
INSTALLATION
GUIDE
PAGE
2
J2 PET Felt Horizontal Acoustic Cloud
3.
Using the supplied cable adjuster kit (x5), insert the bare end of the cable (without loop)
through adjuster (following arrow indicator on adjuster.) Insert wire through pre-drilled
suspension point holes on L bracket (Diagram B), then back through cable adjuster.
4.
Once the panel is suspended, adjust height by feeding more wire through adjuster
(shorter) or depressing collar and revising cable (longer.) Once the panel is in the de-
sired location, trim excess wire.
Diagram B