J2 630, System Manual

Page: 11 / 57

630 System Manual
Version 1.1 December 14, 2010 11
I/O Ports
The J2 630 has an integrated design with all the electronics “in the head”. I/O ports are
accessible in the cable well at the bottom of the unit
(please see below):
Atom Processor
The J2 630 uses the Intel Atom D525 dual core processor which only requires 13 watts of
power and incorporates the north bridge of the chipset as well. With a speed of 1.8GHz,
a 1MB second level cache as well as a memory speed of 800MHz, the J2 630 provides
the performance necessary for thin as well as most thick POS software applications with
enough horse power to run Windows 7. With the graphic and memory controller
intergraded on the same die as the processor the Intel Atom D525 processor provides
excellent video performance and is more than capable of running a secondary monitor
with full screen video at high resolution in addition to running a POS application.
System Memory
The J2 630 comes standard with 1GB of DDR3-800 of memory. The system has two
memory sockets and uses SO-DIMM DDR3-800 type memory. The unit supports a
maximum of 4GB of memory. Additional memory can be added in just one or two
minutes using the slide in / out feature of the system board to access the memory sockets.
On /Off Button
The On/Off button is located in the cable well, as shown above . This button is located
especially to prevent accidental powering down by the user. The function of the button
can be controlled by the OS. Should the J2 630 hang for some reason, note that it can
always be powered off by holding the On / Off button in for four seconds.
The J2 630 also supports the following: Restore to Former states, On or Off if AC
power loss, Wake On LAN, and Wake On RTC alarm features control the system’s
power up. Wake On LAN is enabled by default and the other options are set in the BIOS.
DC-IN
LAN Headset out Mic In
Parallel USB Cash Drawer
Drawer
COM 1, 2, 3, 4
VGA
OFF/ON BUTTON