background image

 

P a g e  

13 | 15

 

 

14.  Common Issues

     

 

If the display has no signal output, check to see if the channel status within the decoders Status tab is 
normal. Also, please check to see whether the decoding address is correct and the decoder network can 
access the address. 

 

15.  Warranty 

If your product does  not work properly because of a  defect in materials of workmanship, our company 

(referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts (1) Year, Labor 
(90) Days”, which starts with the date of original purchase (“Limited Warranty period”), at its option either 

(a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. 
The decision to repair or replace will be made by the warrantor. 

During the “Labor” limited warranty period, 

there will be no charge for labor. 

During the “Parts” warranty period, there will be no charge for parts. You 

must mail-in your product during the warranty period. This Limited Warranty is extended only to the original 
purchaser  and  only  covers  products  purchased  as  new.  A  purchase  receipt  or  other  proof  of  original 
purchase date is required for Limited Warranty service. 

 

16.  Mail-In Service 

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original 
carton. Include a letter detailing the complaint and provide a day time phone and/or email address where 
you can be reached. 

 

17.  Limited Warranty Limits and Exclusions 

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT 
COVER  normal  wear  and  tear  or  cosmetic  damage.  The  Limited  Warranty  ALSO  DOES  NOT  COVER 
damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, 
or  failures  which  result  from  accidents,  misuse,  abuse,  neglect,  mishandling,  misapplication,  alteration, 
faulty installation, set-up adjustments, mis-adjustment of consumer controls, improper maintenance, power 
line surge, lightning damage, modification, or service by anyone other than a Factory Service center or 
other Authorized Servicer, or damage that is attributed to acts of God. 

THERE  ARE  NO  EXPRESS  WARRANTIES  EXCEPT  AS  LISTED  U

NDER  “LIMITED  WARRANTY 

COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES 

RESULTING  FROM  THE  USE  OF  THIS  PRODUCT,  OR  ARISING  OUT  OF  ANY  BREACH  OF  THIS

 

Summary of Contents for JTD-623
















Reviews: