Ready to pair
How to Pair Transmitter with Receiver
1
Enable Pairing Mode for the Receiver
(1) Power up the receiver via external USB power adapter (5V/1A).
(2) Plug the receiver in to the HDMI port on the display
(3) Using a pin, press the reset button in the reset hole on the
receiver for 2 seconds. Release when the screen shows “Release
the button to pair”.
Release the button to pair
2
Press the Transmitter Button
Connect transmitter to laptop or mobile device to provide power.
Press and hold the transmitter button for 5 seconds to complete
pairing while the screen shows “Ready to pair”. After paired, casting
will begin automatically.
Note:
There are 3 functions for the receiver button -
(1) Quick Press: Switch the receiver to 2.4G/ 5G Hz Wi-Fi mode.
(2) Press for 2 seconds: Enable pairing mode for Transmitter.
(3) Press for 10 seconds: Reset the receiver to default settings.
5V/1A
2 secs
HDMI
2
3
1
5 secs
