FIGURE 5
Step-5
Mount Rear J-Brackets by drilling
through the top with a 3/8 drill bit.
Refer to
Figure 5
for bracket Location
** Step-6 Commander Only
(Maverick Skip to Step 7)
Tighten all Bolts and run wiring to the
battery. White wire is (+) Positive.
Black wire is (-) Negative.
AFTER COMPLETING ALL STEPS TURN
ON THE MUSIC AND HAVE FUN.
IF IT’S NOT J.STRONG IT’S NOT STRONG
ENOUGH.
Any questions or comments please
contact us at 877-444-4147 or visit our
website at
http://www.jstrongindustries.com
FIGURE 6
**Step-7 (Maverick Only)
Using a 3/8 drill bit, drill 2 holes in the Top
Beside Left Rear Speaker as seen in
Figure
6
. Remove left front and rear speakers. Pull
White (+) and Black (-) wires into the top
and reroute the wiring to the two newly
drilled holes. Place 2 snap bushings into
then newly drilled holes, place the two
plugs into the front snap bushings where
wires were previously ran, as seen in
Figure
7
.
FIGURE 7
